GFB Part T9358- Diverter Valve GFB Part T9358- Diverter Valve GFB The new DV+ (Suits Select* Mercedes, Ford and Volvo)! ** Refer Vehicle Applications to ensure vehicle suitability. BEWARE of counterfeit products; ONLY buy from authorized dealers on our website GFB’S DV+ SOLUTION COULDN’T BE SIMPLER – KEEP WHAT WORKS AND REPLACE WHAT DOESN’T. Uses factory solenoid coil for seamless integration Replaces plastic valve parts with metal for reliability and strength on chipped engines Direct-fit replacement with GFB’s TMS benefits Exclusive “pilot-actuated” valve mechanism for rapid response at high boost GFB expands the DV+ range with a direct-fit solution for the weak factory diverter valve used on many European vehicles. The solenoid coil itself from the factory-fitted valve is great- the ECU opens it faster than any pneumatic valve so why replace it? The weak point however, is the valve mechanism itself. GFB’s DV+ solves this problem by replacing the valve parts with an anodised billet aluminium housing, fitted with a brass piston machined to exacting tolerances. The end result is sharper throttle response, lightning-fast valve actuation, and it will hold as much boost as you can throw at it. Read all about the DV+ story below. Other manufacturers’ products involve replacing the entire system with a traditional pneumatic valve. This approach requires long vacuum hose runs, additional parts for tapping into the intake manifold vacuum, plus a different solenoid valve to actuate the pneumatic valve, or a ballast resistor to plug into the OE wiring loom. All these additional items result in a product that is slower, less responsive, more expensive and takes much longer to install. GFB’s DV+ solution on the other hand is more responsive, less expensive, easier to install, and doesn’t cause compressor surge/ turbo flutter. Oh, and it doesn’t require different springs or frequent re-builds either. GET BETTER PERFORMANCE, FASTER BOOST RECOVERY AND DON’T PAY FOR WHAT YOU DON’T NEED! Direct Replacement Mercedes Engine Most Common Vehicle: Mercedes/ Ford/ Volvo
GFB

GFB Part T9358- Diverter Valve

Code: T9358
Add Your Review
GFB Part T9358- Diverter Valve
GFB Part T9358- Diverter Valve
GFB Part T9358- Diverter Valve
Dhs. 476.80
In Stock
Add to Wishlist Add to Compare
Category: Engine Hardware, GFB, GFB - FORD, GFB - MERCEDES-BENZ, GFB - VOLVO, Shop Other

  • THIS ITEM IS CONSIDERED SPECIAL ORDER AND IS NOT AVAILABLE FOR IMMEDIATE PICKUP OR DELIVERY

  • 100% ORIGINAL MANUFACTURER PART

  • MANUFACTURER WARRANTY APPLICABLE

The new DV+ (Suits Select* Mercedes, Ford and Volvo)! **

Refer Vehicle Applications to ensure vehicle suitability.

BEWARE of counterfeit products; ONLY buy from authorized dealers on our website

GFB’S DV+ SOLUTION COULDN’T BE SIMPLER – KEEP WHAT WORKS AND REPLACE WHAT DOESN’T.

  • Uses factory solenoid coil for seamless integration
  • Replaces plastic valve parts with metal for reliability and strength on chipped engines
  • Direct-fit replacement with GFB’s TMS benefits
  • Exclusive “pilot-actuated” valve mechanism for rapid response at high boost

GFB expands the DV+ range with a direct-fit solution for the weak factory diverter valve used on many European vehicles.

The solenoid coil itself from the factory-fitted valve is great- the ECU opens it faster than any pneumatic valve so why replace it? The weak point however, is the valve mechanism itself. GFB’s DV+ solves this problem by replacing the valve parts with an anodised billet aluminium housing, fitted with a brass piston machined to exacting tolerances.

The end result is sharper throttle response, lightning-fast valve actuation, and it will hold as much boost as you can throw at it. Read all about the DV+ story below. Other manufacturers’ products involve replacing the entire system with a traditional pneumatic valve. This approach requires long vacuum hose runs, additional parts for tapping into the intake manifold vacuum, plus a different solenoid valve to actuate the pneumatic valve, or a ballast resistor to plug into the OE wiring loom. All these additional items result in a product that is slower, less responsive, more expensive and takes much longer to install.

GFB’s DV+ solution on the other hand is more responsive, less expensive, easier to install, and doesn’t cause compressor surge/ turbo flutter. Oh, and it doesn’t require different springs or frequent re-builds either.

GET BETTER PERFORMANCE, FASTER BOOST RECOVERY AND DON’T PAY FOR WHAT YOU DON’T NEED!

Direct Replacement Mercedes Engine 
Most Common Vehicle: Mercedes/ Ford/ Volvo

The new DV+ (Suits Select* Mercedes, Ford and Volvo)! **

Refer Vehicle Applications to ensure vehicle suitability.

BEWARE of counterfeit products; ONLY buy from authorized dealers on our website

GFB’S DV+ SOLUTION COULDN’T BE SIMPLER – KEEP WHAT WORKS AND REPLACE WHAT DOESN’T.

  • Uses factory solenoid coil for seamless integration
  • Replaces plastic valve parts with metal for reliability and strength on chipped engines
  • Direct-fit replacement with GFB’s TMS benefits
  • Exclusive “pilot-actuated” valve mechanism for rapid response at high boost

GFB expands the DV+ range with a direct-fit solution for the weak factory diverter valve used on many European vehicles.

The solenoid coil itself from the factory-fitted valve is great- the ECU opens it faster than any pneumatic valve so why replace it? The weak point however, is the valve mechanism itself. GFB’s DV+ solves this problem by replacing the valve parts with an anodised billet aluminium housing, fitted with a brass piston machined to exacting tolerances.

The end result is sharper throttle response, lightning-fast valve actuation, and it will hold as much boost as you can throw at it. Read all about the DV+ story below. Other manufacturers’ products involve replacing the entire system with a traditional pneumatic valve. This approach requires long vacuum hose runs, additional parts for tapping into the intake manifold vacuum, plus a different solenoid valve to actuate the pneumatic valve, or a ballast resistor to plug into the OE wiring loom. All these additional items result in a product that is slower, less responsive, more expensive and takes much longer to install.

GFB’s DV+ solution on the other hand is more responsive, less expensive, easier to install, and doesn’t cause compressor surge/ turbo flutter. Oh, and it doesn’t require different springs or frequent re-builds either.

GET BETTER PERFORMANCE, FASTER BOOST RECOVERY AND DON’T PAY FOR WHAT YOU DON’T NEED!

Direct Replacement Mercedes Engine 
Most Common Vehicle: Mercedes/ Ford/ Volvo

 

SPECIAL ORDER

Parts available on www.hvpautomotive.com are special ordered from outside the United Arab Emirates. Once a customer places an order on www.hvpautomotive.com website, we will proceed to contact the product supplier and place an order for the part. Availability and delivery of the part will depend on supplier. Please contact us prior to placing an order so we can confirm availability and ETA of the specific part. Otherwise, www.hvpautomotive.com is not responsible for part delays and delivery.

SHIPPING

Shipping timelines will vary depending on product availability. The shipping couriers with work with are FedEx, DHL and UPS. Parts delivery to the United Arab Emirates can vary from 5 business day up to 30 business days. Customers will be informed of any delays in availability and delivery.

RETURNS & REFUNDS

www.hvpautomotive.com operates on a zero return & refund policy for all special order products. If you are not sure of the product or have questions, please contact us and we can verify your part requirements, fitments and application.

If you have any questions regarding these Terms, please send an email to info@hvpautomotive.com